Slider Interactive Card (YouTube tutorial available)


Slider Interactive Card

Check out the YouTube Tutorial here

An interactive card that reveals the message when you pull the tab

Main body Pool Party 11 x 4¼, scored at 5½ Basic White 4 x 5¼ (cut a 2nd one for the inside of using a dark card body) DSP 3¾ x 5 Strip of Pool Party 4¼ x 1¼ Punch a 1” hole on the left and right (as far in as the punch will go and lining the punch to the edge of the DSP) Cut between the 2 holes to create a window Add dimensional strips either side of the pulling strip, behind the window and additional Dimensionals at the bottom, and one on the right hand edge of the pulling strip, under the greeting. Punch a greeting using the 1¾ punch and a layer using the 2” punch. Cut a 1 punch for the end of the pulling strip. Tear and Tape extra strong adhesive recommended

Comments

Post a Comment

Popular posts from this blog

Nests of Christmas October 2024 Paper Pumpkin Alternatives #1 (YouTube tutorial available)

Image
Nests of Christmas October 2024 Paper Pumpkin Alternatives #1  Check out the YouTube Tutorial here        These cards were made using 2 cards from the kit with a few added ingredients. Cut the arched section off the card then rotate it so the blue is at the right Score the light green section at 2 ⅛   and fold back on itself in a Z Fold style Add the punched out rectangle section from card 2 Add the die cut pieces as shown using dimensionals. The greenery is slightly fussy cut to remove the red berries for another card Ink Real Red Push the arch out of the middle and save for another card Cut this section down from 4½ x 5½ to 4 x 5¼ Basic White cut slightly smaller at 3 ⅞ x 5 ⅛ Stamp the greeting directly onto the white background and greenery around the edges The main body of the card is Blueberry Bushel 8½ x 5½, scored at 4¼ Add the arched piece to the front with dimensionals The bird is one of the die cut pieces and the red berries that were fussy cut of...
Read more

Bookbinding Z Fold Card (YouTube tutorial available)

Image
Bookbinding Z Fold Card Check out the YouTube Tutorial here To subscribe to Paper Pumpkin follow this link to become one of my Pumpkineers Main body Berry Burst 11 x 4¼, scored at 2⅛, 4¼ & 5½ Front Z fold 3¼ x 4¼ Basic White 3⅛ x 4⅛ Inside layer 4 x4 DSP (I used Delightful Floral) cut 2 pieces 1 x 4 Fussy cut a large flower Stamp from the March 2013 very first Paper Pumpkin Ink Berry Burst Artistry Blooms sequins Dimensionals
Read more

Painted Petal Paper Pumpkin Card Alternatives using the envelopes in the kit (YouTube tutorial available)

Image
Painted Petal Paper Pumpkin Card Alternatives using the envelopes in the kit Check out the YouTube Tutorial here To subscribe to Paper Pumpkin click  here My online store is linked over in the left hand menu but I've linked it  here  too Cut the envelope down each side, just a slither. Cut the coloured front off the white back  Cut across the front horizontally at 4¼ Cut the white side at 3" This should leave the floral side measuring 2¾" Trim the floral piece by ¼ at the top so it ends up being 2¾ x 4 Stamp a greeting at the top using the stamps in the kit and Grey Granite ink. Using the back of the envelope, cut a piece that measures 3 x 4¼ and attach it with the same sized piece that was cut from the front, making sure you leave the coloured side facing out Main body of each card 8½ x 5½, scored at 4¼ and 2 ⅛ Calypso Coral, Peach Pie & Melon Mambo Attach the double thickness envelope panel to the front of the Z, being careful not to get adhesive too far over t...
Read more

Paper Pumpkin Daisy Daydream March 2025 More Envelope-based Alternatives (YouTube tutorial available)

Image
  Paper Pumpkin Daisy Daydream March 2025 More Envelope-based Alternatives Check out the YouTube Tutorial here Check out 3 Envelope-based Alternatives  here   Check out a Honeycomb YouTube video  here Check out another 5 Alternatives YouTube video here Card 1 Main body Mossy Meadow 8½ x 5½, scored at 4¼, plus a piece for the greeting 2 ⅞ x 1 ⅝ Basic White for the inside 5¼ x 4 Cut the envelope to 5 ⅜ x 4 ⅛ Gently press the fold line from behind to try and get rid of as much ridge as possible. Cut a front layer from a spare piece 2¾ x 1½ Add one of the punch-out daisy sprays with Dimensionals Stamp the greeting with Mossy Meadow (I used one from the Feb 2025 Paper Pumpkin kit) Add a small daisy punch out The yellow pearls are from a past Paper Pumpkin kit Card 2 Main body Basic Beige 8½ x 5½, scored at 4¼, plus a piece for the greeting 3½ x 1 ⅞ Cut the 2 curved sections of the envelope so they have a ¼" overlap. When I did this from the leftovers of the first alternat...
Read more

Simple Front Flap Card (YouTube tutorial available)

Image
Simple Front Flap Card Check out the YouTube Tutorial here Main body 8½ x 5½, scored at 4¼  (video uses Summer Splash) Cut down from the score to the bottom at 1¼ from each outer edge Basic White 2¾ x 4 DSP (video uses Unbounded Beauty) is 4¾. x 4  Cut 1 x 4 off each side and the remaining 2¾ x 4 is for the middle flap Adhere the two 1¼ edge pieces of cardstock down, leaving only the middle to open The two 1 x 4 DSP pieces go on the stuck-down areas Stick the 2¾ x 4 to the flap and the Basic White to the inside Stamps Simply Said Ink Petunia Pop I used Tombow Mono Liquid Glue to stick the sides down firmly or you could use Tear & Tape Dimensionals
Read more

Paper Pumpkin Daisy Daydream March 2025 5 Alternatives (YouTube tutorial available)

Image
Paper Pumpkin Daisy Daydream March 2025 - 5 Alternatives Check out the YouTube Tutorial here Check out an additional Honeycomb card YouTube video here Check out another 3 envelope-based cards YouTube video here Card 1 Blue base 8½ x 5½, scored at 4¼ additionally scored at 2 ⅛ Cut the back off the card with the daisies and cut the back in half so it measures 4¼ x 2¾ Attach the long stemmed daisy to this piece. Cut the envelope with the honeycomb in the bottom left corner, open and cut the piece down to 4 ⅛ x 2 ⅝ Stamp a greeting on one of the die cut labels with Lost Lagoon Ink and attach the small punch-out daisy as shown. Attach to the card with dimensionals Card 2 Basic White base 11 x 4¼, scored at 5½ Attach the green circle to the front Stamp a bee on the corner of the front layer with Memento Black ink and colour the stripes with Daffodil Delight Stampin' blends. Layer the piece onto the card using dimensional strips Attach 2 of the punch-out daisies around the circle opening....
Read more

Paper Pumpkin Daisy Daydream March 2025 #5 More Alternatives (YouTube tutorial available)

Image
Paper Pumpkin Daisy Daydream March 2025 4 cards from one card base + an envelope alternative card Check out the YouTube Tutorial here Check out more envelope-based Alternatives YouTube Tutorial  here Check out 3 Envelope-based Alternatives YouTube video  here   Check out a Honeycomb YouTube video  here Check out another 5 Alternatives YouTube video  here To make 4 cards from one card base.  Cut the card in half down the score line.  Cut the front vertically to create 2 pieces 2 ⅛  x 5½ Cut the back horizontally to create 2 pieces 4¼ x 2¾ 4 main bases Basic White 8½ x 5½, scored at 4¼. Colour each front lightly using a Blending Brush and Crushed Curry ink Card 1 & 2 Basic Back 2¼ x  3½ plus a greeting strip 3½ x ¾ with the ends chevroned Crushed Curry 2 ⅛ x  3 ⅜ Back of an envelope from a previous alternate 2 x 3¼ Use one of the punch-out greeting pieces Stamp the panel with the Honeycomb in Crushed Curry and the greeting in Memento i...
Read more

Paper Pumpkin Daisy Daydream March 2025 3 Envelope-based Alternatives (YouTube tutorial available)

Image
Paper Pumpkin Daisy Daydream March 2025 3 Envelope-based Alternatives Check out the YouTube Tutorial here Check out a Honeycomb YouTube video  here Check out another 5 Alternatives YouTube video here Card 1 Main body Basic Black 8½ x 5½, scored at 4¼ plus a small piece for the banner ¾ x 2¾ Basic White for the inside 5½ x 4 Pull the envelope very gently apart and open fully flat. Cut the layer 5¼ x 4 Gently press from behind to minimise the score line Using one of the edge scraps, stamp with Memento Black ink and chevron one end. Chevron the black piece too and layer them together. Add 2 punch-out daisies and a bee using dimensionals Add some bling - I used indeterminately old Paper Pumpkin embellishments  Die cut a rectangle from the back flap using Textured Notes dies and save for card 2) Card 2 Main body Mossy  Meadow 8½ x 5½, scored at 4¼ plus a layer 4 x 2½ Basic White for the inside 5½ x 4 Slice the envelope open at each side and open fully. From the closing flap en...
Read more

Puzzle Slider 8 Bar Card (YouTube tutorial available)

Image
Puzzle Slider 8 Bar Card Check out the YouTube Tutorial here Check out the 4 piece YouTube Tutorial here Please note, there are 1/16th involved in this card so it's best to watch the video to see why 15/16th matter and not just cut the DSP strips at 1 full inch! Main body Petal Pink 9½ x 4¼, scored at 1, 2, 7½ & 8½ Front piece 5½ x 4¼ cut into 4 horizontal strips at 1 1/16  then different widths DSP cut into 4 horizontal strips at 15/16 then different widths See the 2 templates below Banner cut from Basic White using Stylish Shapes dies Stamps Simply Said Ink Crushed Curry                   Cardstock Cutting Template                                                                DSP Cutting Template
Read more

Puzzle Slider Card (YouTube Tutorial available)

Image
Puzzle Slider Card  Check out the YouTube Tutorial  here Main Body Basic White 9½ x 4¼, scored at 1,2, 7½ & 8½ Puzzle layer Petunia Pop 5½ x 4¼ Inside layer 5 x 4 DSP (I used Thoughtful Journey 6x6) 5 x 3¾ cut according to the template shown on my blog post that matches the YouTube video here Greeting cut using Unbounded Love dies Stamp Set Unbounded Love Ink Petunia Pop 24-26 In-Colour and Wild Wheat 23-25 In-Colour
Read more